Engineering of Cerium Modified TiNb2O7 Nanoparticles For Low-Temperature Lithium-Ion Battery.

Abstract

Although TiNb2O7 (TNO) with comparable operating potential and ideal theoretical capacity is considered to be the most ideal replacement for negative Li4Ti5O12 (LTO), the low ionic and electronic conductivity still limit its practical application as satisfactory anode for lithium-ion batteries (LIBs) with high-power density. Herein, TNO nanoparticles modified by Cerium (Ce) with outstanding electrochemical performance are synthesized. The successful introduction of Ce3+ in the lattice leads to increased interplanar spacing, refined grain size, more oxygen vacancy, and a smaller lithium diffusion barrier, which are conducive to improve conductivity of both Li+ and electrons. As a result, the modified TNO reaches high reversible capacity of 256.0mAhg-1 at 100mAg-1 after 100cycles, and 183.0mAhg-1 even under 3200mAg-1. In particular, when the temperature drops to -20°C, the cell undergoing 1500cycles at a high current density of 500mAg-1 can still reach 89.7mAhg-1, corresponding to a capacity decay rate per cycle of only 0.033%. This work provides a new way to improve the electrochemical properties of alternative anodes for LIBs at extreme temperature.