Engineering considerations for water circulation in crawfish ponds with paddlewheel aerators

Abstract

Engineering considerations for paddlewheel aeration in vegetated shallow water ponds for the production of procambarid crawfish is necessary to ensure cost-effective application. Three experimental ponds (approximately 2 ha each) were planted with rice in August as forage for the resident pond population of red swamp crawfish, Procambarus clarkii, and flooded in October. Two 2.2 kW (3 hp), single-phase electric motor (110 V ac) paddlewheel aerators were placed in each pond. The aerator rotors were 160-cm long and 95-cm in diameter. The aerator rotor had 36 paddles with half the paddles 27.3-cm long and half 34.9-cm long. Rotor speed was set at 83 rpm and operated at three paddle submergence settings: 7.6, 12.7, and 17.8 cm below the water surface. Over a 20-week period between November and April, channel velocity, head difference, and aerator amperage was measured for both one and two aerators in operation in each pond. Results indicated that circulation of oxygenated water from the aerators can be accomplished as efficiently with a single aerator set at a lower paddle depth (7.6-cm) compared to operating two aerators set at a greater paddle depth (12.7 or 17.8-cm). However, based on the apparent efficiency of the aerators and the calculated channel roughness coefficients values obtained from the channel velocities, paddlewheel aerators are an inefficient option for circulating the pond water especially when rice foliage dominants the total vegetative biomass of the pond.