Engineering and microstructural properties of self-compacting concrete containing coarse recycled concrete aggregate

Abstract

In this paper, the possibility of utilising coarse recycled concrete aggregate (CRCA) obtained from a construction and demolition waste (CDW) plant in Delhi to make 60 MPa self-compacted concrete (SCC) was evaluated. The CRCA was used in as-collected condition and was not processed any further. The aggregate packing (bulk) density (APD) method was adopted to prepare the SCC-CRCA mixture in order to obtain an aggregate mixture exhibiting maximum bulk density/least void content (45%). In addition, SCC was made using aggregate mixtures in which the natural coarse aggregate (NCA) was replaced with CRCA at 0%, 20% and 100% of the total coarse aggregate content by weight. The cement, fly ash, silica fume and water were kept constant for all SCC mixtures. The effects of CRCA on the flow behaviour, mechanical strength, shrinkage characteristics and microstructure properties of SCC mixtures were evaluated. The test results indicated that SCC mixtures made with up to 45% CRCA replacement can be used for structural concrete, which is higher than that recommended in Indian (20%) and international specifications (35%) for traditionally vibrated (conventional) concrete.