Abstract

Seawater electrolysis represents a potential solution to grid-scale production of carbon-neutral hydrogen energy without reliance on freshwater. However, it is challenged by high energy costs and detrimental chlorine chemistry in complex chemical environments. Here we demonstrate chlorine-free hydrogen production by hybrid seawater splitting coupling hydrazine degradation. It yields hydrogen at a rate of 9.2 mol h–1 gcat–1 on NiCo/MXene-based electrodes with a low electricity expense of 2.75 kWh per m3 H2 at 500 mA cm–2 and 48% lower energy equivalent input relative to commercial alkaline water electrolysis. Chlorine electrochemistry is avoided by low cell voltages without anode protection regardless Cl– crossover. This electrolyzer meanwhile enables fast hydrazine degradation to ~3 ppb residual. Self-powered hybrid seawater electrolysis is realized by integrating low-voltage direct hydrazine fuel cells or solar cells. These findings enable further opportunities for efficient conversion of ocean resources to hydrogen fuel while removing harmful pollutants.

Highlights

  • Seawater electrolysis represents a potential solution to grid-scale production of carbonneutral hydrogen energy without reliance on freshwater

  • Coupling them into 3D configuration yields an electrocatalytic electrode with superaerophobic-hydrophilic and hydrazine-friendly interface, large gas transport channels, high active surface area and superb conductivity for promoting hybrid seawater electrolysis

  • Transmission electron microscopy (TEM) and X-ray diffraction (XRD) reveal that the NiCo@C consists of numerous single-crystal NiCo alloy nanoparticles (

Read more

Summary

Introduction

Seawater electrolysis represents a potential solution to grid-scale production of carbonneutral hydrogen energy without reliance on freshwater. Water electrolysis excels the traditional petrochemical techniques in terms of processing efficiency, renewables compatibility, and carbon neutrality for yielding high-purity hydrogen[3,4] This technology produces only 4% of hydrogen in the market due to the unaffordable cost (>$ 4 kg–1) of electricity consumption for overcoming the high potential of overall water splitting (OWS) reaction[5]. For commercial alkaline water electrolyzers, the basic electricity demand is 4.3–5.73 kWh for yielding 1 m3 of H2 at the cell voltages of 1.8 − 2.4 V and practical current level of 300−500 mA cm–215–17 Such a high energy consumption fundamentally stems from the OER with large thermodynamic potential (1.23 V vs. RHE) and slow multiple proton-coupled electron-transfer kinetics[18,19]. Replacing the OER by thermodynamically more favorable electro-oxidation reactions offers a ground-breaking strategy for energy-saving hydrogen production while adding extra functionalities like electrosynthesis[20,21,22,23,24]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call