Energy-Based Approach: Analysis of a Laterally Loaded Pile in Multi-Layered Non-Linear Elastic Soil Strata

Abstract

Several studies have been reported in published literature on analytical solutions for a laterally loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer. The present study describes a new continuum-based analysis or energy-based approach for predicting the pile displacement responses subjected to static lateral loads and moments considering the soil non-linearity. This analytical analysis treats the pile as an elastic Euler–Bernoulli beam and the soil as a three-dimensional (3D) continuum in which the non-linear elastic properties are described by a modulus degradation relationship. The principle of virtual work was applied to the energy equation of a pile–soil system in order to obtain the governing differential equation for the pile and soil displacements. An iterative procedure was adopted to solve the equations numerically using a finite difference method (FDM). The pile displacement response was obtained using the software MATLAB R2021a, and the results from the energy-based method were compared with those obtained from the field test data as well as the finite element analysis (FEA) based on the software ANSYS Workbench 2021R1. The present study investigated the effect of explicit incorporation of soil properties and layering through a parametric study in order to understand the importance of predicting appropriate pile displacement responses in a linear elastic soil system. The responses indicated that the effect of soil layers and their thicknesses, pile properties and the variation in soil moduli have a direct impact on the displacements of piles subjected to lateral loading. Hence, a proper emphasis has to be given to account for the soil non-linearity. Considering the effect of soil non-linearity, it is observed that the results obtained from the energy-based method agreed well with the field measured values and those obtained from the FEA. The results indicated a difference of approximately less than 7% between the proposed method and the FEA. The approach presented in this study can be further extended to piles embedded in multi-layered soil strata subjected to the combined action of axial loads, lateral loads and moments. Furthermore, the same approach can be extended to study the response of the soil to group piles.