Abstract
Experimental investigation on the NO<sub><i>x</i></sub> removal efficiency and energy yield (EY) of eight dielectric barrier discharge (DBD) reactor configurations is done in this work. A high voltage pulsed power supply developed in the laboratory is used to generate nonthermal plasma (NTP) in the reactors with eight types of electrodes varying in shape and dimensions. Simulated NO<sub><i>x</i></sub> gas with a concentration of 350 ppm is passed at a flow rate of 8 l/min through the reactors. Different pulse voltage amplitude and repetition rate are applied to the reactors for generating NTP in the confined airgap. Gas concentrations at the inlet and outlet, applied voltage, and voltage across the monitoring capacitance were measured at each of these operating points. Corresponding discharge power, specific energy density (SED), NO<sub><i>x</i></sub> removal efficiency, and EY were calculated. NTP treatment without any catalysts/adsorbents attained NO<sub><i>x</i></sub> removal efficiency of 95% and above using screw thread electrode, 5 mm rod electrode, pipe electrode and coiled wire electrode configurations. But considering the discharge power, SED, and hence the EY of the process, DBDs with pipe electrode and wire electrode were found to be effective with lower energy consumption. Based on this observation, the selection of appropriate DBD configuration and electrical input parameters can be made according to the intended EY for a specific process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
