Abstract
The productivity of cutting and bundling whole trees using the first prototype of a bundle-harvester comprised of a harwarder as the base machine, an accumulating felling head, and a compacting device was studied in three young stands in order to facilitate the further development of the concept. In addition, the removal and its composition were studied as a means of laying the foundations for developing methods for work rating and measurement on delivery. Bundling enables in-depth integration of pulpwood and energy wood procurement. Both energy wood (crown biomass) and pulpwood can be incorporated into the same bundles, and the subsequent separation of these fractions takes place at the debarking phase at the pulpmill. Bundle-harvesting productivities were relatively low (2.8â3.7Â m/E-h) when compared to current harvesting technology. Improving working techniques, machine structure, and components showed great potential for increasing the efficiency of the concept. The bundles were dimensionally uniform. Their solid volume varied between 0.350Â m and 0.513Â m, depending on the bundle assortment and stand properties. Integrating energy wood harvesting with pulpwood harvesting increased removal even by 59 per cent.3033
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.