Energy transfer and release during the fracture of UD fiber-reinforced thermoplastic composites

Abstract

This study delves into the complex dynamics of energy transfer and release during the fracture of unidirectional (UD) fiber-reinforced thermoplastic composites. Conducted through meticulous experimental observations and rigorous energy analysis, the research presents groundbreaking conclusions on the fracture toughness and energy conversion efficiency of UD carbon fiber composites under various loading conditions. A prominent focus is on how these mechanical properties are intricately linked to the sample’s fiber orientation angles and the external conditions applied during testing.The work employed tapered double cantilever beam (TDCB) as the far-field boundary to investigate the energy changes, transfer, and conversion processes during the crack propagation of unidirectional fiber reinforced thermoplastics (UDFRTPs) structures. It was found that throughout the entire propagation process, blunt extension occurs first followed by inertial extension. This is because in the initial stage of crack propagation, the stored elastic energy in the structure is relatively small, making the crack tip prone to blunting. This continuous blunting impedes the release of internal strain energy in the structure, with blunt extension accounting for a very small proportion of the entire fracture process. When the internal strain energy in the structure continues to increase to a certain extent, the blunting of the crack tip cannot prevent the release of a large amount of elastic energy inside the structure. At the same time, the excess released strain energy converts into kinetic energy and continually impacts the blunted region at the crack tip. At this point, the propagation transitions into the inertial extension stage, which occupies a significant portion of the entire fracture process.