Abstract

The production cycle of complex processing of oilseeds with receiving vegetable oil, soluble and insoluble fraction from mix of the crushed pressing with heated water is offered; a squirrel from soluble fraction, the dried-up insoluble fraction. The main basic decision on decrease in energy consumption was the optimum choice of temperature differences in the evaporator and sections of the two-section condenser when receiving drying agents, the cooling air and warm water. The deviation from these values inevitably leads to increase in the consumed energy: fall of temperature of boiling of coolant in the evaporator on 1 °C results in need of increase in a consumption of working steam in the ejector of the paroezhektorny thermal pump, and therefore to an energy overexpenditure for 5–7 %, and temperature increase of condensation on 1° C leads to increase in power consumption by 2.0–2.5 %. The offered technology expands borders of energy efficient interface of objects of various temperature potentials on the basis of utilization and recovery of secondary energy resources. Universal approach in creation of the competitive technology providing heat generation and cold weather for in common proceeding heattechnological processes is fully realized. Ecologically safe conditions in implementation of technology due to use of water as coolant, excepting use toxic, vzryvo – and fire-dangerous working environments and also at the expense of the organization of the closed recirculation schemes for material and power streams with considerable decrease in removal of secondary energy resources from the scheme warm and cold supply are created.

Highlights

  • В настоящее время важнейшим приоритетом является разработка энергосберегающих технологий переработки растительного сырья в белковые продукты и компоненты с последующим использованием растительных белков в пищевой и комбикормовой промышленности [1]

  • Отклонение от этих значений неизбежно приводит к увеличению потребляемой энергии: понижение температуры кипения хладагента в испарителе на 1 °C приводит к необходимости увеличения расхода рабочего пара в эжектор пароэжекторного теплового насоса, а следовательно, к перерасходу энергии на 5–7%, а повышение температуры конденсации на 1 °C приводит к увеличению расхода энергии на 2,0–2,5% [10]

  • Spitler J.D., Gehlin S.E.A. Thermal response testing for ground source heat pump systems—An historical review // Renewable and Sustainable Energy Reviews

Read more

Summary

Анализ резервов эффективности

Производительность валковой мельницы, степень измельчения и расход энергии взаимосвязаны и определяются отношением окружных скоростей, диаметром и геометрической формой вальцов, профилем и характеристикой рифлей [8, 9]. Растворимая фракция суспензии в качестве промежуточного белоксодержащего продукта отводится проходом через вибросито 8 и в дальнейшем используется в кормопроизводстве при составлении рационов кормления сельскохозяйственных животных. Образовавшаяся после эжектора 14 смесь эжектируемого и рабочего пара направляется через распределитель 29 в секции 15 и 16 двухсекционного конденсатора. Часть образовавшегося после секций конденсатора 12 и 13 водяного конденсата направляется через терморегулирующий вентиль в испаритель для пополнения в нем убыли воды, а другая избыточная часть конденсата отводится в сборник конденсата 18. Одна часть нагревается в секции двухсекционного конденсатора для нагревания воздуха и в качестве сушильного агента подается в барабанные сушилки 1 и 9, а другая часть подается в гравитационный охладитель 4 на охлаждение выжимки с образованием замкнутых термодинамических циклов.

Хладагент вода
Technological parameters of oilseeds at different stages of technology
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.