Energy saving system for building cooling and heating integration based on building information modelling technology

Abstract

In order to understand the energy-saving system of building cooling and heating integration, the author proposes a research on an energy-saving system of building cooling and heating integration based on building information modelling (BIM) technology. The author first analyzed the energy-saving performance of the system by establishing models for each module based on meteorological data simulated on the DeST software platform. Secondly, in order to analyze the energy consumption of the integrated system, it is necessary to establish a residential building model, and select the building model in the cold winter and hot summer areas of a city for analysis. The results show that due to the system?s heat storage function, there is no need to consume electricity in spring and autumn. Compared to the electric heating hot water mode, the integrated system can save 1198.85 kWh of electricity in non-cooling and heating seasons, with a 100% energy-saving rate. Compared to not using an integrated system, it can achieve an energy-saving rate of 81.9% throughout the entire refrigeration and heating season, with significant energy-saving effects. The integrated heating, cooling and hot water system of BIM technology adopts the technology of cool storage and heat storage coupled with solar energy and heat pump technology. The system has simple structure, obvious energy-saving effect, good environmental protection, and can adapt to various climates throughout the year. The introduction of underfloor heating also increases the comfort of buildings and residences.