Abstract
Long term evolution standard employs the discontinuous reception (DRX) technology to help user equipment (UE) in energy saving. After the UE received nothing from the base station for a predefined time span, it turns off the radio frequency module to enter sleep mode for energy saving. An UE may fail to handover or lost connection for late handover in case it enters sleep mode before handover and missed the optimal handover timing, therefore results in data loss. This paper proposes an energy saving mechanism with a prediction based intra-handover which predicts the next target handover base station and the optimal handover time according to the historical path data kept in a database. The UE would check whether the next sleep mode outlast the handover time point before entering sleep mode to reduce power consumption for handover failure caused by the long DRX cycle and base station reselection. Simulation results show that the DRX mechanism helps reduce power consumption of UE by 90---95 % over the conventional one more than 7 % handover failures. The energy saving mechanism combined with route prediction leads to 22 % more energy saving while cutting handover failures to 5 %.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.