ENERGY SAVING BY REPLACING UNLOADED ENGINES OF NON-STANDARD EQUIPMENT FOR ROLLING STOCK REPAIR

Abstract

It is established that at various technological processes at repair of a rolling stock of railways electric drives of the universal non-standard equipment can constantly work in essentially underloaded mode that leads to deterioration of their power indicators. The aim of the work is to quantify the reduction of active power losses when replacing constantly underloaded asynchronous motors of unregulated electric drives of universal non-standard technological equipment used in the repair of railway rolling stock with less powerful ones. In this work, the subject of research are the motors of electric drives of this equipment. The analysis of technological processes at repair of a rolling stock, technical characteristics of the specified equipment is carried out and the conclusion is accepted that first of all it is expedient to investigate efficiency of replacement on the equipment of the established engine on less powerful at carrying out at the specialized enterprises of such technological processes warehouse (wheel pairs, traction motors, auxiliary electric machines, frames of rolling stock carts, etc.). The load of the electric motors of transport trolleys of equipment is proposed to be defined as the ratio of the weight of a large unit of electric locomotive, diesel locomotive, electric train and other types of rolling stock to the carrying capacity of universal non-standard equipment of transport trolley. The term "universal" equipment is introduced in the work, which means equipment for performing a certain technological process in the repair of various large units of different types of rolling stock, as well as "specialized enterprise" specializing in the repair of rolling stock, large units which weigh significantly less, than the load-lifting capacity of the transport cart of the equipment. Therefore, the motors of electric drives of universal equipment at these enterprises are constantly operating underloaded. Also actions for quantitative assessment and reduction of active power losses in the electric drive motor are offered.