Energy resolution of pulsed neutron beam provided by the ANNRI beamline at the J-PARC/MLF

Abstract

We studied the energy resolution of the pulsed neutron beam of the Accurate Neutron–Nucleus Reaction Measurement Instrument (ANNRI) at the Japan Proton Accelerator Research Complex/Materials and Life Science Experimental Facility (J-PARC/MLF). A simulation in the energy region from 0.7meV to 1MeV was performed and measurements were made at thermal (0.76−62meV) and epithermal energies (4.8−410eV). The neutron energy resolution of ANNRI determined by the time-of-flight technique depends on the time structure of the neutron pulse. We obtained the neutron energy resolution as a function of the neutron energy by the simulation in the two operation modes of the neutron source: double- and single-bunch modes. In double-bunch mode, the resolution deteriorates above about 10eV because the time structure of the neutron pulse splits into two peaks. The time structures at 13 energy points from measurements in the thermal energy region agree with those of the simulation. In the epithermal energy region, the time structures at 17 energy points were obtained from measurements and agree with those of the simulation. The FWHM values of the time structures by the simulation and measurements were found to be almost consistent. In the single-bunch mode, the energy resolution is better than about 1% between 1meV and 10keV at a neutron source operation of 17.5kW. These results confirm the energy resolution of the pulsed neutron beam produced by the ANNRI beamline.