Energy recovery by fast pyrolysis of pre-treated trommel fines derived from a UK-based MSW material recycling facility

Abstract

In this experimental study, a physically pre-treated trommel fines feedstock, containing 44 wt% non-volatiles (ash and fixed carbon) and 56 wt% volatile matter (dry basis), was subjected to fast pyrolysis to recover energy from its organic load, using a 300 g h−1 bubbling fluidized bed (BFB) fast pyrolysis rig. A physical pre-treatment method (including crushing, grinding and sieving) was used to prepare a 0.5–2 mm sized trommel fines feedstock to make it suitable for fast pyrolysis in the BFB reactor. Experimental results from the fast pyrolysis process showed that the highest yield of organic liquid was obtained at around a temperature of 500 °C. However, both char and gas yields increased dramatically at temperatures above 500 °C, as a result of enhanced cracking of organic vapours, which reduced the yield of liquid products. Overall, energy recovery from the pyrolysis products (liquid and gas products as well as char pot residues) ranged from 63 to 70%, generally increasing with temperature. A large proportion of the high ash content (36 wt%) of the feedstock was found in the char pot (>62%), while smaller proportions were found in the reactor bed and some liquid products. The char pot ash residues composed mostly of non-hazardous earth materials and may be applied in bulk construction materials e.g. cement manufacture. Although, there was no problem with the pyrolysis rig during 1 h of operation, longer periods of operation would require periodic removal of accumulated solid residues and/or char pot modification to ensure continuous rig operation and process safety.