Energy partitioning by broiler breeder pullets in skip-a-day and precision feeding systems

Abstract

ABSTRACTAn empirical nonlinear mixed model was derived to describe metabolizable energy (ME) partitioning in Ross 308 broiler breeder pullets. Its coefficients described ME used for total heat production (HP) and growth. A total of 630 pullets were randomly and equally assigned to 2 treatments: precision feeding (PF) and conventional skip-a-day feeding (CON) from 10 to 23 wk of age. The PF system allowed birds to enter voluntarily at any time, weighed them, and provided access to feed for 60 s if their BW was less than the target BW. Birds in the CON treatment were fed as a group on alternate days. Energetic efficiency of pullets was evaluated using residual total heat production (RHP), defined as the difference between observed and predicted total HP. Additionally, ME intake (MEI), ADG, HP, and cumulative feed conversion ratio (FCR) were calculated for the entire experimental period. The energy partitioning model (P < 0.05) predicted MEI = (120+u)BW0.68 + 1.52(ADG) + ε. Total HP was (120 kcal/kg0.68 + u); the energy requirement for each g of BW gain was 1.52 kcal/d. The random variable u ∼ N (0, σu2) indicated a pen level HP standard deviation σu = 12.1 kcal/kg0.68. Over the experimental period, for CON and PF treatments, respectively, MEI was 194 and 174 kcal/d (P < 0.001); ADG was 15.3 and 15.4 g/d (P = 0.94); HP was 129 and 111 kcal/kg0.68 (P < 0.001); FCR was 4.888 and 4.057 (P < 0.001); and RHP was 0.12 and –0.12 kcal/kg0.68 (P = 0.73). The CON pullets had similar ADG, but higher MEI relative to PF, consistent with levels of heat production predicted by RHP. The PF pullets had lower cumulative FCR compared to CON pullets. The PF pullets lost less energy as heat, likely because they were fed continuously, reducing the need to store and mobilize nutrients compared to CON pullets. Thus, increased feeding frequency likely increased PF pullet efficiency.