Abstract
The energy loss in a torus vessel during startup is now an important factor in a power-producing tokamak design. The torus design cannot be based on a system which minimizes the conductivity with resistive structures as in present experimental devices. If the resistivity of the torus is too high, the reactors are subject to damage from an uncontrolled fast shutdown such as a disruption. The thermal and magnetic stored energy due to the plasma current loop is several hundred megajoules, which can produce melting of the torus wall. To prevent excessive damage, a low resistance passive circuit must be provided close to the plasma edge. Another desirable design feature is to make all vacuum seals as far away from the plasma as practical. Thus, the reactor torus designs need an inner low resistance shell and an outer high resistance shell. In addition, the superconducting dewar and coil support structures provide paths for toroidal currents to flow. The calculations provided in this paper can be used to determine the size and cost of the systems as a function of the resistances of the structures. The results can thus be used to guide the preliminary concepts for the electromagnetic characteristics of amore » tokamak.« less
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.