Abstract
Water end-use, in buildings, industrial facilities, and farms, often has the highest energy intensity. This review highlights key findings on energy intensity of water end-use in urban and agricultural sectors. In the domestic sector, energy used for water heating constitutes 14–25 % of total energy use in US households. Heat pumps for energy recovery from hot grey water in residential buildings, and micro-turbines operating from grey water in tall buildings, are being increasingly explored. In agriculture, groundwater pumping consumes most of the on-farm energy, and water-efficient pressurized delivery systems have higher energy consumption. Rainwater harvesting systems are being deployed in many regions. The energy intensity range for residential rainwater harvesting has been reported to be 0.6–5.3 kWh/m3 in Australia. However, with improved pump efficiency, the intensity can be lowered to 1.5 kWh/m3, which would be less than other non-conventional sources such as seawater desalination or indirect potable reuse.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.