Abstract
The sustainability of rock engineering is an emerging trend in future development, as society increasingly recognizes the importance of environmental conservation and responsible resource utilization. In this context, the field of rock engineering is undergoing a paradigm shift toward more sustainable practices. A significant aspect of this shift is the investigation of energy evolution laws specific to rocks, which assumes paramount importance in ensuring the sustainable utilization of damaged rock roadways. To investigate the impact of confining pressure and pore pressure on the energy evolution characteristics of rock beyond the peak, post-peak cyclic loading and unloading tests were conducted on sandstone specimens under hydraulic coupling conditions using the MTS815 rock mechanical test system. The study encompassed three sets of confining pressures, namely, 10 MPa, 20 MPa, and 30 MPa. Different levels of pore pressure were applied within each confining pressure group. For the 10 MPa confining pressure, the pore pressure values were set at 2 MPa, 4 MPa, 6 MPa, and 8 MPa. Similarly, for the 20 MPa and 30 MPa confining pressures, the corresponding pore pressure values were 2 MPa, 6 MPa, 10 MPa, 14 MPa, 18 MPa, and 22 MPa. The experimental findings indicate that as the confining pressure increases, both the maximum and residual elastic energy densities of the rock gradually increase. The rise in confining pressure impedes the release of elastic energy. Moreover, with increasing confining pressure, the rate of increase in the maximum dissipated energy density diminishes, highlighting the inhibitory effect of confining pressure on energy dissipation and release within the rock. Pore pressure, on the other hand, disrupts the load-bearing structure of the rock and reduces its energy storage capacity. Under a constant confining pressure, for a fixed number of cycles (axial strain), the total input energy density, elastic energy density, and dissipation energy density exhibit a negative correlation with pore pressure. With an increase in the number of cycles (axial strain), the proportion of elastic energy initially rises but subsequently declines, while the proportion of dissipated energy follows the opposite trend. Furthermore, as the confining pressure increases, the peak proportion of elastic energy also tends to increase. This indicates that higher confining pressures promote energy accumulation after rock failure, enhancing the rock’s ability to store elastic energy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.