Abstract
Fibre-reinforced plastics (FRPs) are becoming increasingly important in aerospace and automotive applications. However, dry machining of FRPs generates abrasive and electrically conductive dust particles that can furthermore cause explosive dust-air mixtures in the enclosed workspace of the machine tool. In order to protect the machine operator and the machine tool, powerful extraction systems (engine power > 5 kW) are usually installed and operated with a constant flow rate, resulting in a significant increase of the machine tool’s overall energy requirement. This paper introduces a novel approach for a demand-oriented control of the flow rate to increase the energy efficiency of dust extraction systems. The objective of the developed control mechanisms is to maintain the maximum permissible dust limit with minimum energy demand. A low-cost dust sensor serves as a feedback system for the applied control mechanism. In a further stage, a force measuring platform was added to provide additional signals for an increased performance of the controlled system. To evaluate the presented approach, milling tests were carried out with carbon-fibre-reinforced plastic (CFRP). The experimental results show that the energy requirement can be reduced by up to 70%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.