Energy dissipation mechanism and ballistic characteristic optimization in foam sandwich panels against spherical projectile impact

Abstract

This study systematically examines the energy dissipation mechanisms and ballistic characteristics of foam sandwich panels (FSP) under high-velocity impact using the explicit non-linear finite element method. Based on the geometric topology of the FSP system, three FSP configurations with the same areal density are derived, namely multi-layer, gradient core and asymmetric face sheet, and three key structural parameters are identified: core thickness (tc), face sheet thickness (tf) and overlap face/core number (no). The ballistic performance of the FSP system is comprehensively evaluated in terms of the ballistic limit velocity (BLV), deformation modes, energy dissipation mechanism, and specific penetration energy (SPE). The results show that the FSP system exhibits a significant configuration dependence, whose ballistic performance ranking is: asymmetric face sheet > gradient core > multi-layer. The mass distribution of the top and bottom face sheets plays a critical role in the ballistic resistance of the FSP system. Both BLV and SPE increase with tf, while the raising tc or no leads to an increase in BLV but a decrease in SPE. Further, a face-core synchronous enhancement mechanism is discovered by the energy dissipation analysis, based on which the ballistic optimization procedure is also conducted and a design chart is established. This study shed light on the anti-penetration mechanism of the FSP system and might provide a theoretical basis for its engineering application.