Energy Conversion by Nanomaterial-Based Trapezoidal-Shaped Leg of Thermoelectric Generator Considering Convection Heat Transfer Effect

Abstract

Thermoelectric generators (TEGs) can harvest energy without any negative environmental impact using low potential sources, such as waste heat, and subsequently convert that energy into electricity. Different shaped leg geometries and nanostructured thermoelectric materials have been investigated over the last decades in order to improve the thermal efficiency of the TEGs. In this paper, a numerical study on the performance analysis of a nanomaterial-based (i.e., p-type leg composed of BiSbTe nanostructured bulk alloy and n-type leg composed of Bi2Te3 with 0.1 vol % SiC nanoparticles) trapezoidal-shaped leg geometry has been investigated considering the Seebeck effect, Peltier effect, Thomson effect, Fourier heat conduction, and surface to surrounding irreversible heat transfer loss. Different surface convection heat transfer losses (h) are considered to characterize the current output, power output, and thermal efficiency at various hot surface (TH) and cold surface (TC) temperatures. Good agreement has been achieved between the numerical and analytical results. Moreover, current numerical results are compared with previous related works. The designed nanomaterial-based TEG shows better performance in terms of output current and thermal efficiency with the thermal efficiency increasing from 7.3% to 8.7% using nanomaterial instead of traditional thermoelectric materials at h = 0 W/m2K while TH is 500 K and TC is 300 K.