Abstract
An attempt was undertaken to determine indicators of energy consumption in bio-electro reactors (BERs) i.e., an aerobic rotating electrobiological disc contactor (REBDC) and an anaerobic sequencing batch biofilm reactor (SBBR), during contaminant removal from soilless tomato cultivation wastewater having a specific composition, i.e., high nitrate and phosphorus concentrations and low COD. Because of this specificity, the energy consumption during the treatment process was characterized by a cumulative indicator for simultaneous removal of phosphorus and nitrates—EEINUTRIENTSrem (electric energy consumption per unit of removed nutrient load, expressed as kWh/kgNUTRIENTSrem). Four values of direct current density were tested: 0.63, 1.25, 2.5, and 5.0 A/m2. The indicator values were compared at a hydraulic retention time (HRT) of 24 h. The study demonstrated that the values of electric energy consumption per unit of removed nutrient load determined in the anaerobic SBBR ranged from 30 to 464 kWh/kg NUTRIENTSrem and were lower than the values obtained in the aerobic REBCD, i.e., 80–1380 kWh/kg NUTRIENTSrem.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
