Abstract
In order to acquire vehicle emissions and fuel economy by driving a vehicle on a chassis dynamometer, it is imperative that the chassis dynamometer should exactly simulate the road experience of the vehicle. In this paper, the modelling of a heavy-duty vehicle energy consumption both on the road and on a chassis dynamometer was developed and implemented by using two driving cycles. Road coast-down tests of a vehicle were conducted to obtain a road load equation of the vehicle. Its companion chassis dynamometer coast-down tests were aimed to estimate the characteristics of the dynamometer-vehicle system. Power absorber settings were achieved that duplicate the vehicle road load in the dynamometer testing. Comparing the measured energy of the vehicle between driving cycles on the chassis dynamometer and the calculated energy on the road, it is shown that the West Virginia University (WVU) transportable heavy-duty chassis dynamometer is successful in simulating the vehicle road load conditions when conducting emissions testing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
