Abstract
Concentrated solar power (CSP) cannot stand as a sustainable solution for power production without daily interruption unless solar energy is stored for the night hours. Solar intermittency and equally often non-dispatchability can be constrained by the use of energy storage. Thermochemical energy storage (TCES) based on the calcium looping (CaL) process is a distinctive and highly promising technology as it stores energy in the form of chemical bonding through the calcination reaction (CaCO3→CaO+CO2). Solar energy is required to accomplish the endothermic calcination reaction, while it is released as thermal energy during the exothermic carbonation reaction (CaO+CO2→CaCO3). This paper presents an energy and exergy analysis of the integration of a CSP−CaL plant, based on simulation results performed in AspenPlus™. The process flow diagram includes an indirect solar integration, while power production occurs uninterruptedly through the integration of CO2 based Brayton cycle as well as Steam Rankine cycle (SR) of various configurations. Global energy efficiencies of 28.6–31.5% can be achieved under several operating policies. The exergy analysis focuses on examining the critical irreversibilities of the system, under the variation of key process parameters values such as CO2 inlet temperature to calciner, carbonation pressure and CaO storage temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.