Abstract
High concentrator photovoltaic is expected to play an increasingly important role in electrical energy production. Controlling multijunction solar cell temperature within the recommended conditions is a key challenge that limits the functionality of this growing technology making the identification of an efficient cooling method an essential requirement. Hence, in this research, new heat sink configurations based on a serpentine design are studied and compared with the straight channel arrangement. To assess the performance of the high concentrator photovoltaic, a 3D model is built for the multijunction cell and heat sink and impact of the heat sink configuration, mass flow rate, and concentration ratio are investigated. The results include solar cell temperature distribution, thermal resistance, pumping power, thermal and electrical energy and exergy efficiencies. The study shows that the straight channel is not recommended for concentration above 1000×, whereas the centre inlet serpentine design can maintain a uniform temperature distribution for the system for concentration up to 2000×. Temperature non-uniformity varies between 18 °C and 5 °C. The highest overall energy and exergy efficiencies reached 78% and 35.2% respectively at concentration of 2000×. The results prove the effectiveness of implementing a serpentine design as a new cooling scheme for the system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
