Abstract
Oxy-fuel combustion technology replaces air with a mixture of pure O2 and recycled flue gas for coal combustion, which leads to difficulties in the waste heat recovery of flue gas in the boiler tail of coal-fired power plants. This paper proposes a new integration scheme for waste heat recovery of flue gas in coal-fired power plants with oxy-fuel combustion CO2 capture. By introducing an oxygen preheater, a recycled flue gas preheater, and a low-pressure economizer, the waste heat of flue gas is fully recovered to preheat oxygen, recycled flue gas, and feed water, respectively. The proposed scheme simultaneously ensures the safe operation of the recycled fan and improves the thermal performance of the coal-fired power plants. Compared to the air combustion configuration, the boiler’s efficiency and gross power efficiency in the oxy-fuel combustion configuration are increased by 0.42% and 1.29%, respectively. Due to power consumption for the added equipment, the net power efficiency is reduced by 10.41%. A techno-economic analysis shows that the cost of electricity for oxy-fuel combustion in coal-fired power plants has increased from USD 46.45/MWh to USD 80.18/MWh, and the cost of the CO2 avoided reaches USD 43.24/t CO2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
