Abstract
ABSTRACT The significant growth of the industrial sector in recent decades has led to an increase in the volume of waste, which if not properly destined, could cause serious environmental problems. In the context of aquaculture, liquid effluents with a high organic content are generated in large quantities in the fish processing industries, and if their disposal is carried out improperly, serious damage to the environment is caused. The general objective of this study is to evaluate: the efficiency of removal of COD and BOD, in addition to the influence on pH; alkalinity; chlorides; ammonia; nitrite; nitrate; phosphate; turbidity; total, fixed and volatile solids, from the effluent of fish processing treated by coagulation and sedimentation using the natural chitosan coagulant. pH 5.5 followed by pH 6 showed better results for the use of chitosan coagulant in the process of treatment by effluent coagulation of fish processing industry. Chitosan does not act on the parameters TVS, alkalinity, chlorides, ammonia, nitrite, nitrate, and phosphate, regardless of the dosage used. However, it acts on BOD, COD, TS, TFS and turbidity. Thus, the best dosage of chitosan is 0.25 g L-1 in optimized activity at pH of 5.5.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Arquivo Brasileiro de Medicina Veterinária e Zootecnia
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
