Abstract
ABSTRACTNaphthenic acids, due to their tendency to precipitate out of solution when in contact with formation water, present a formidable challenge for the petroleum industry. In this study, precipitation of hexadecanoic acid from an idealized oil-water (toluene/brine) system was investigated. The FTIR results revealed that the acid was mainly precipitated as calcium hexadecanoate. Experiments designed to study the effect of water cut, acid concentration, brine concentration, and pH of the brine on the amount of the precipitate formed revealed that the amount of precipitate formed increased with increase in brine pH, concentration of the acid and calcium ions. Similar effect was observed with respect to water cut but with maximum amount of the precipitate formed at water cut of about 40%, below and above which relatively lower amount of the acid was precipitated irrespective of the levels of the other factors. In general, the observed effects of the factors suggest that precipitation of the naphthenic acid can be minimized with acidic formation water that contains relatively low concentration of calcium ions particularly when the concentration of the acid in the oil is as low as possible.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
