Emissions Savings in the Corn‐Ethanol Life Cycle from Feeding Coproducts to Livestock

Improving the environmental life cycle performance of buildings by focusing on the reduction of greenhouse gas (GHG) emissions along the building life cycle is considered a crucial step in achieving global climate targets. This paper provides a systematic review and analysis of 75 residential case studies in humid subtropical and tropical climates. The study investigates GHG emissions across the building life cycle, i.e., it analyses both embodied and operational GHG emissions. Furthermore, the influence of various parameters, such as building location, typology, construction materials and energy performance, as well as methodological aspects are investigated. Through comparative analysis, the study identifies promising design strategies for reducing life cycle-related GHG emissions of buildings operating in subtropical and tropical climate zones. The results show that life cycle GHG emissions in the analysed studies are mostly dominated by operational emissions and are the highest for energy-intensive multi-family buildings. Buildings following low or net-zero energy performance targets show potential reductions of 50–80% for total life cycle GHG emissions, compared to buildings with conventional energy performance. Implementation of on-site photovoltaic (PV) systems provides the highest reduction potential for both operational and total life cycle GHG emissions, with potential reductions of 92% to 100% and 48% to 66%, respectively. Strategies related to increased use of timber and other bio-based materials present the highest potential for reduction of embodied GHG emissions, with reductions of 9% to 73%.

Quantifying Australia’s life cycle greenhouse gas emissions for new homes

The primary goal of this work was to assess the magnitude and variability of published life cycle greenhouse gas (GHG) emission estimates for three types of geothermal electricity generation technologies: enhanced geothermal systems (EGS) binary, hydrothermal (HT) flash, and HT binary. These technologies were chosen to align the results of this report with technologies modeled in National Renewable Energy Laboratory's (NREL's) Regional Energy Deployment Systems (ReEDs) model. Although we did gather and screen life cycle assessment (LCA) literature on hybrid systems, dry steam, and two geothermal heating technologies, we did not analyze published GHG emission estimates for these technologies. In our systematic literature review of the LCA literature, we screened studies in two stages based on a variety of criteria adapted from NREL's Life Cycle Assessment (LCA) Harmonization study (Heath and Mann 2012). Of the more than 180 geothermal studies identified, only 29 successfully passed both screening stages and only 26 of these included estimates of life cycle GHG emissions. We found that the median estimate of life cycle GHG emissions (in grams of carbon dioxide equivalent per kilowatt-hour generated [g CO2eq/kWh]) reported by these studies are 32.0, 47.0, and 11.3 for EGS binary, HT flash, and HT binary, respectively (Figure ES-1). We also found that the total life cycle GHG emissions are dominated by different stages of the life cycle for different technologies. For example, the GHG emissions from HT flash plants are dominated by the operations phase owing to the flash cycle being open loop whereby carbon dioxide entrained in the geothermal fluids is released to the atmosphere. This is in contrast to binary plants (using either EGS or HT resources), whose GHG emissions predominantly originate in the construction phase, owing to its closed-loop process design. Finally, by comparing this review's literature-derived range of HT flash GHG emissions to data from currently operating geothermal plants, we found that emissions from operational plants exhibit more variability and the median of emissions from operational plants is twice the median of operational emissions reported by LCAs. Further investigation is warranted to better understand the cause of differences between published LCAs and estimates from operational plants and to develop LCA analytical approaches that can yield estimates closer to actual emissions.

Assessing the effectiveness of building retrofits in reducing GHG emissions: A Canadian school case study

Forest carbon accounting methods and the consequences of forest bioenergy for national greenhouse gas emissions inventories

Life cycle greenhouse gas (GHG) emissions from the production of nuclear power (in g CO2e/kWh) are uncertain due partly to a paucity of data on emissions from individual phases of the nuclear fuel cycle. Here, we present the first comprehensive life cycle assessment of GHG emissions produced from the mining and milling of uranium in Canada. The study includes data from 2006-2013 for two uranium mine-mill operations in northern Saskatchewan (SK) and data from 1995-2010 for a third SK mine-mill operation. The mine-mill operations were determined to have GHG emissions intensities of 81, 64, and 34 kg CO2e/kg U3O8 at average ore grades of 0.74%, 1.54%, and 4.53% U3O8, respectively. The production-weighted average GHG emission intensity is 42 kg CO2e/kg U3O8 at an average ore grade of 3.81% U3O8. The production-weighted average GHG emission intensity drops to 24 kg CO2e/kg U3O8 when the local hydroelectric GHG emission factor (7.2 g CO2e/kWh) is substituted for the SK grid-average electricity GHG emission factor (768 g CO2e/kWh). This results in Canadian uranium mining-milling contributing only 1.1 g CO2e/kWh to total life cycle GHG emissions from the nuclear fuel cycle (0.7 g CO2e/kWh using the local hydroelectric emission factor).

Effect of distillers grains moisture and inclusion level in livestock diets on greenhouse gas emissions in the corn-ethanol-livestock life cycle

Major US electric utility climate pledges have the potential to collectively reduce power sector emissions by one-third

Combining Biomass, Natural Gas, and Carbonless Heat to Produce Liquid Fuels and Electricity

Introducing demand to supply ratio as a new metric for understanding life cycle greenhouse gas (GHG) emissions from rainwater harvesting systems

Energy-related activities are a major contributor of greenhouse gas (GHG) emissions. A growing body of knowledge clearly depicts the links between human activities and climate change. Over the last century the burning of fossil fuels such as coal and oil and other human activities has released carbon dioxide (CO2) emissions and other heat-trapping GHG emissions into the atmosphere and thus increased the concentration of atmospheric CO2 emissions. The main human activities that emit CO2 emissions are (1) the combustion of fossil fuels to generate electricity, accounting for about 37% of total U.S. CO2 emissions and 31% of total U.S. GHG emissions in 2013, (2) the combustion of fossil fuels such as gasoline and diesel to transport people and goods, accounting for about 31% of total U.S. CO2 emissions and 26% of total U.S. GHG emissions in 2013, and (3) industrial processes such as the production and consumption of minerals and chemicals, accounting for about 15% of total U.S. CO2 emissions and 12% of total ...

Taking Stock of Strategies on Climate Change and the Way Forward: A Strategic Climate Change Framework for Australia

Better information on greenhouse gas (GHG) emissions and mitigation potential in the agricultural sector is necessary to manage these emissions and identify responses that are consistent with the food security and economic development priorities of countries. Critical activity data (what crops or livestock are managed in what way) are poor or lacking for many agricultural systems, especially in developing countries. In addition, the currently available methods for quantifying emissions and mitigation are often too expensive or complex or not sufficiently user friendly for widespread use.The purpose of this focus issue is to capture the state of the art in quantifying greenhouse gases from agricultural systems, with the goal of better understanding our current capabilities and near-term potential for improvement, with particular attention to quantification issues relevant to smallholders in developing countries. This work is timely in light of international discussions and negotiations around how agriculture should be included in efforts to reduce and adapt to climate change impacts, and considering that significant climate financing to developing countries in post-2012 agreements may be linked to their increased ability to identify and report GHG emissions (Murphy et al 2010, CCAFS 2011, FAO 2011).

Based on the localized data of environmental load, this study has establishedthe life cycle assessment (LCA) model of battery electric passenger vehicle(BEPV) that be produced and used in China, and has evaluated the energyconsumption and greenhouse gases (GHGs) emission during vehicle pro-duction and operation. The results show that the total energy consumptionand GHG emissions are 438GJ and 37,100kg (in terms of CO2 equivalent)respectively. The share of GHG emissions in total emissions at the productionstage is 24.6%, and 75.4% GHG emissions are contributed by the operationalstage. The main source of energy consumption and GHG emissions at vehicleproduction stage is the extraction and processing of raw materials. TheGHG emissions of raw materials production accounts for 75.0% in the GHGemissions of vehicle production and 18.0% in the GHG emissions of fulllife cycle. The scenario analysis shows that the application of recyclablematerials, power grid GHG emission rates and vehicle energy consumption rates have significant influence on the carbon emissions in the life cycle ofvehicle. Replacing primary metals with recycled metals can reduce GHGemissions of vehicle production by about 7.3%, and total GHG emissionscan be reduced by about 1.8%. For every 1% decrease in GHG emissionsper unit of electricity, the GHG emissions of operation stage will decrease byabout 0.9%; for every 1.0% decrease in vehicle energy consumption rate, thetotal GHG emissions decrease by about 0.8%. Therefore, developing cleanenergy, reducing the proportion of coal power, optimizing the productionof raw materials and increasing the application of recyclable materials areeffective ways to improve the environmental performance of BEPV.

Uncertainties in life cycle greenhouse gas emissions from U.S. beef cattle