Abstract
AbstractA multiband and reconfigurable antenna is the one of the main aspects in the communication system which has an extremely important role. An embedded based solution for the fast operation of a reconfigurable antenna to work in a specific operating frequency band is the solution of future technologies. Embedded based solution increases the speed by avoiding the dependence on manual control of the RF switching elements. In this paper, the proposed embedded system‐controlled switching mechanism operate the reconfigurable antenna in any one of the operating bands by a single command to be send from a remote location. The embedded system receives the command and configure a set of PIN diodes as per the modes. The proposed solution consists an Arduino UNO board as motherboard, SIM900A as GSM module to receive the command from user, biasing circuit to control the operation of PIN diode, PIN diode to reconfigure the patch pattern and a user mobile for sending AT command.The proposed model is successful and tested on proteus software 8.0. The model is also deployed on the newly designed multiple‐input‐multiple‐output antenna where the result shows the successful operation to achieve multiband frequency operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
