Abstract
This paper deals with smart home energy management through load scheduling and optimal use of available energy sources. In this study, three energy sources were considered: the national electricity grid, photovoltaic (PV) energy, and the storage unit. The PV array can provide the maximum power to the load at a given operating point where the output power changes with temperature, radiation and load. Therefore, a real-time controller is proposed to track the maximum power. An energy management algorithm has been proposed in a smart home to achieve the main goal of making the electricity bill as low as possible. The algorithm involves scheduling loads by assigning a priority to each load. The loads are supplied with the required power according to their priorities and the available energy. The obtained results indicate that supplying the PV system with a fuzzy-based MPPT indicates an increase in system efficiency. The results also showed that the use of energy management based on load scheduling led to a significant reduction in the electricity bill.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of Electrical Engineering and Informatics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
