Abstract

Precipitates always have a complex effect on the hot work hardening and recrystallization softening of materials. In this work, the dual effect of V-microalloying on hot deformation behavior and microstructure evolution of high nitrogen martensitic stainless steel (HNMSS) was investigated by hot compression experiments, modeling study and microstructure characterization. The results showed that V-microalloying enhanced the flow stresses and activation energy of 0.2V steel due to the fine grain strengthening effect and the blocking effect of dynamic precipitation on dislocation movement and grain boundary migration. On the other hand, the recrystallization model and deformed microstructure indicated the more intense dynamic recrystallization (DRX) softening effect in 0.2V steel, inducing the faster decrease of flow stress after the peak stress. V-microalloying promoted the dynamic precipitation of HNMSS during hot deformation, which reduced the size and increased the number of precipitates in 0.2V steel. The fine precipitates hindered dislocation movement, promoted dislocation accumulation and entanglement, formed a particle deformation zone (PDZ) with high dislocation density and large orientation gradient, and then induced the occurrence of particle-stimulated nucleation (PSN). In addition, the dislocation cells evolved from dislocation entanglement were also favorable nucleation sites for DRX.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call