Abstract
The multiple-angle-of-incidence ellipsometric studies of the decoration by isopropyl alcohol of porous silicon (PSi) have been performed. The existence of a subsurface thin film of modified PSi with 5–7 % higher porosity contrary to the initial PSi layer was established. The refractive index and thickness of the film were calculated in the single-layer reflective system model. It was found that empty pores of the film after the sample was kept in isopropyl alcohol for 24 h were filled by its molecules. Thus, the effective refractive index of the modified film decreased while its thickness slightly increased. The refractive index decrease of the film over time during several months of observation is the result of the continuation of the PSi oxidation in atmospheric conditions. The work also presents the results of the PSi samples' oxidation degree by the ellipsometric method after high-temperature annealing in dry air (T = 1000 °C).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
