Abstract

The analysis of platinum (Pt), palladium (Pd) and rhodium (Rh) in aquatic samples by the diffusive gradients in thin films (DGT) technique using chelating resins, specific designed for the accumulation of PGEs, namely Purolite S914, S920 and Italmatch Chemicals IONQUEST® MPX-317. may however, still be influenced by the accumulation of other elements such (Cu, Zn, Pb, etc.) which will be extracted simultaneously by the hot aqua regia extraction and interfere with the Inductively Coupled Plasma Mass Spectrometry (ICPMS) analysis of the Platinum Group Elements (PGEs). Selective extractions were investigated to release the interfering elements without loss of the Platinum Group Elements (PGEs) from the resin gels. . A rinse with deionized water removes over 95% of Sr and Rb and a second rinse with 0.05 mol L−1 H2SO4 can be used to as a common eluent to remove an important fraction of the interfering elements from S920 and S914 without loss of PGEs but this results in loss of around 15% of the PGEs from MPX-317. It was shown that selective extractions can be used to remove specific interferences from each resin gel.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.