Abstract
AbstractPerovskite solar cells have potential to deliver terawatt‐scale power via low‐cost manufacturing. However, scaling is limited by slow, high‐temperature annealing of the inorganic transport layers and the lack of reliable, large‐area methods for depositing thin (<30 nm) charge transport layers (CTLs). We present a method for scaling ultrathin NiOx hole transport layers (HTLs) by pairing high‐speed (60 m min−1) flexographic printing with rapidly annealed sol–gel inks to achieve the fastest reported process for fabrication of inorganic CTLs for perovskites. By engineering precursor rheology for rapid film‐leveling, NiOx HTLs were printed with high uniformity and ultralow pinhole densities resulting in photovoltaic performance exceeding that of spin‐coated devices. Integrating these printed transport layers in planar inverted PSCs allows rapid fabrication of high‐efficiency (PCE > 15%) CsxFA1−xPbI solar cells with improved short circuit currents (Jsc) of 22.4 mA cm−2. Rapid annealing of the HTL accelerates total processing time by 60X, while maintaining the required balance of optoelectronic properties and the chemical composition for effective hole collection. These results build an improved understanding of ultrathin NiOx and reveal opportunities to enhance device performance via scalable manufacturing of inorganic CTLs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.