Abstract
Transverse mode instability (TMI) significantly limits the power scaling of ytterbium-doped fiber lasers. In this Letter, what we believe to be a novel TMI mitigation strategy is proposed and demonstrated in a bidirectional output fiber laser. On the basis of the continuous wave (CW) pump, integrating a quasi-continuous wave (QCW) pump can effectively improve the TMI threshold of the system. In the experiment, a QCW pump with a repetition rate of 1 kHz and a duty cycle of 10% was injected into a CW-pumped fiber laser oscillator, which successfully broke the power limit and alleviated the beam quality degradation. Moreover, when applying a pump modulation depth of approximately 68%, the TMI threshold was notably increased from 624 W in the free-running condition to 1093 W at end B, which is a 469 W (75%) improvement. At this time, the beam quality factor M2 at end B is approximately 1.48, and the stimulated Raman scattering suppression ratio is about 28 dB. Compared to conventional TMI mitigation methods, this approach provides active control in the time domain of fiber lasers, without compromising the optical structures, thereby effectively mitigating TMI and offering broad application prospects.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
