Elemental analysis of valuable byproducts by TXRF spectrometry: coal fly ash and activated carbon

Abstract

In order to ensure that byproducts are environmentally friendly and fit for purpose, their chemical composition must be determined, with special attention to elements at trace level. The large variability in the type of matrices demands a versatile analytical technique, compatible with sample preparation methods allowing both fast composition screenings and accurate quantitative analysis.In this work, byproducts derived from carbon-rich matrices, including coal fly ash and activated carbon from coconut and almond shells, were investigated by means of total reflection x-ray spectrometry and different sample preparations. Suspension, acid digestion, solid-liquid extraction and ashing were performed and assessed as to their complexity and detection capabilities, ranging from 0.01 mg/kg to 16 mg/kg, depending on the element and sample preparation. The internal standard quantification with gallium, aided by a variation of the standard additions method to take into account its possible presence in the samples, allowed to determine elements of environmental and technological interest, including K, Ca, Ti, V, Mn, Cr, Ni, Cu, Zn, Ga, As, Sr, Pb. Assets, limits and possible developments are presented and discussed.