Electrospun polarity-controlled molecular orientation for synergistic performance of an artifact-free piezoelectric anisotropic sensor.

Abstract

Anisotropy in mechanical, optical and thermal sensors in a spatial direction has many applications in health care, robotics, aerospace, and tissue engineering. In particular, wearable and implantable sensors respond to stretching and bending strains that probe mechanical energy and track physiological signals. Hence, the development of anisotropic pressure sensors with true piezoelectric (PE) signals is of utmost importance to achieve efficient devices. Herein, a simple and efficient method is developed for high longitudinal and transverse responses, with an approach to isolating a true piezoelectric signal. The electrospun (ES) polarity of oriented dipoles inside flexible fibers gives rise to a high longitudinal/transverse PE response of both lateral and transverse strains. Nanofibers of poly(vinylidene-chlorotrifluoroethylene) copolymers contain poled dipoles, up to 86%, that promote an enhanced PE coefficient of 42 pm V-1 in the case of negative polarity-based electrospinning. It is 40% higher in composition than the commonly adopted positive polarity-biased electrospinning process. We demonstrated the advantage of such a high PE coefficient by the enhanced sensitivity of the longitudinal (VLs = 0.3 V kPa-1, ILs = 0.07 μA kPa-1) as well as transverse (VTs = 1.0 V kPa-1, ITs = 0.8 μA kPa-1) PE response. To counter the ambiguity of high transverse response as compared to longitudinal in electrospun fiber-based devices, a facile method is proposed to isolate the ferroelectret, triboelectric and piezoelectric signals in a fiber-based hybrid device with their independent charge generation mechanisms.