Electrospinning of Nanofiber-Based Materials and Application of the Technology to Lower Extremity Joint Exercise Rehabilitation

Abstract

This study mainly explores the electrospinning of nanofiber-based materials and the application of the technology to lower extremity joint exercise rehabilitation. In response to people’s concerns, this study mainly discusses electrospinning technology from the aspects of the safety of nanomaterials prepared by electrospinning technology and the application of nanomaterials prepared by electrospinning technology in lower limb joints. In the safety study of nanomaterials, six groups of experiments were set up to measure the joints of nanomaterials prepared by electrospinning technology under pressures of 500 N, 510 N, 520 N, 530 N, 540 N, and 550 N. For compression resistance, when the pressure is 540 N, the compressive performance of the nanomaterial is preferably 96%. In terms of the application of nanomaterials, 100 patients with lower extremity sprains in the Affiliated Hospital of Sun Yat-sen University were divided into 5 groups and then divided into 6 groups. Patient recovery rate when the device is applied to the patient’s lower extremity joint. Patients had the best recovery rate of 92% when the immobilization device was used for 6 days. The use of arthrodesis did not affect the patient’s other factors. The experimental results show that when the pressure is 540 N and the fixation device is used for 6 days, the nanofiber material prepared by electrospinning technology has the best rehabilitation effect on lower limb joint movement.