Abstract
Introduction The aim of this study was to examine the fatigue behavior, especially at the low-cycle fatigue (LCF) region, of an experimentally electropolished FlexMaster and a commercial electropolished nickel-titanium (NiTi) instrument (RaCe) in a corrosive environment. Methods A total of 90 NiTi rotary instruments were subjected to rotational bending at various degrees of curvatures while immersed in 1.2% sodium hypochlorite solution until broken. The maximum surface strain amplitude, calculated from the curvature of the instrument and the diameter of the cross section at break, was plotted against the LCF life. The results were compared with data for a non-electropolished commercial product tested by using the same methodology. Results The fatigue life of both instruments generally declined with increasing surface strain amplitude; there was a significant difference between the 2 instruments. Comparing the surface-treated FlexMaster with its commercially available non-electropolished counterpart, an improved resistance to fatigue breakage as a result of electropolishing was noted ( P < .05). Conclusions The LCF life of a NiTi instrument rotating with a curvature in a corrosive environment is enhanced by electropolishing. The design, both cross-sectional and longitudinal, appears to have an effect on the fatigue behavior of NiTi rotary instruments.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
