Abstract
This study has analyzed the welding joint of carbon fiber reinforced plastics (CFRP) and aluminum alloys. The surface of CFRP and 5083 Al alloy was modified by electroplating with nickel at first. Then the effect of electroplating parameters on coating was explored. SEM images revealed that the coating gradually became well but then began to fall off with the current density and the plating time increased. CFRP and aluminum alloys were brazed at 285[Formula: see text]C and held for 20 s. Shear test was used to evaluate the strength of the joint and the strength was probably 7.56 MPa. SEM and EDS tests showed that there existed diffusion of the elements in the welding process and the joint reached the bonding of atomic or molecular sizes. Thus, this experiment achieved the tight brazing joining between thermoset CFRP and aluminum alloys providing the joining method of the application for CFRP.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
