Abstract
Porous titanium samples of cp Ti grade IV were obtained by space-holder technique (50%vol of NH4HCO3, 800 MPa, 1250 oC during 2h in high vacuum), producing a good balance between stiffness and mechanical strength. The samples were coated with chitosan/45S5 bioactive glass composite by electrophoretic deposition. Homogeneity, infiltration efficiency, and coatings integrity (cracking and adhesion) were evaluated in order to establish correlations with processing parameters. SEM, FTIR, and contact profilometry were performed for detailed characterization of the coatings; and micro-mechanical properties (P-h curves and scratch testing) were set-up as well. Optimum EPD parameters were 25V, 7 min and suspension containing 0.5 g/L chitosan and 1.5 g/L BG a titanium structure with pore sizes greater than 200 μm are required.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.