Abstract
The linear accelerator system of the PBP-CMU Electron Linac Laboratory has been designed with the aim of generating free-electron lasers (FELs) in the mid-infrared (MIR) and terahertz (THz) regions. The quality of the radiation is strongly dependent on the properties of the electron beam. Among the important beam parameters, the electron beam energy and energy spread are particularly important. To accurately measure the electron beam energy, the first dipole magnet in the bunch compressor system and the downstream screen station are employed as an energy spectrometer. The A Space Charge Tracking Algorithm (ASTRA) software is used for the design and optimization of this system. Simulation results demonstrate that the developed spectrometer is capable of accurately measuring the energy within the 5–25 MeV range. The screen station system is designed and constructed to have the ability to capture a beam size with a resolution of 0.1 mm per pixel. This resolution is achieved with a screen-to-camera distance of 1.2 m, which proves sufficient for precise energy measurement. The systematic error in energy measurement is found to be less than 10%, with a minimum energy spread of 0.4% achievable when the horizontal beam size remains below 3 mm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.