Abstract

ABSTRACTThin film hetero‐emitter solar cells with large‐grained poly‐silicon absorbers of around 10 µm thickness have been prepared on glass. The basis of the cell concept is electron‐beam‐crystallization of an amorphous or nanocrystalline silicon layer deposited onto a SiC:B layer. The SiC:B layer covers a commercially well available glass substrate, serving as diffusion barrier, contact layer and dopand source. For silicon absorber deposition a low pressure chemical vapour deposition was used. The successively applied e‐beam crystallization process creates poly‐silicon layers with grain sizes up to 1 × 10 mm2 with low defect densities. The high electronic quality of the absorber is reflected in open circuit voltages as high as 545 mV, which are realized making use of the well‐developed a‐Si:H hetero‐emitter technology. Copyright © 2011 John Wiley & Sons, Ltd.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.