Electromechanical response of boron nitride nanosheet reinforced nanocomposite beam: A finite element study

Abstract

The objective of the present study is to investigate the electromechanical response of a piezoelectric boron nitride nanosheet reinforced nanobeam accounting for the surface and the flexoelectric effects using finite element analysis. The finite element model was developed by using the size-based Euler–Bernoulli beam model, modified piezoelectricity theory, and Galerkin's weighted residual method. The boron nitride nanosheet-reinforced nanobeam was loaded with uniformly distributed load and point-loading conditions. Three common boundary conditions for beams such as clamped-free, simply supported, and clamped-clamped have been considered here. The electromechanical behavior of the boron nitride nanosheet reinforced nanobeam has been studied under the pure surface, pure flexoelectric, as well as combined surface and flexoelectric effects. It is observed that the integrated surface and flexoelectric effects are mainly responsible for enhancing the electromechanical performance of the nanobeam. For the thickness H = 20 nm, the maximum deflection of the nanobeam was reduced by ∼50% when both the flexoelectricity and surface effects are combined together for all the support conditions. Moreover, the circular cross-section beam becomes ∼30% stiffer than the rectangular cross-section beam under the integrated effect of surface and flexoelectricity under all loading conditions. Hence, the highly size-dependent surface and flexoelectricity must be explored in the accurate electromechanical behavior of the nanostructure. Furthermore, beam stiffness is highly influenced by the flexoelectric effect irrespective of the beam boundary conditions whereas the surface effect is largely reliant on the beam boundary conditions. This research work provides a methodology to design efficient boron nitride nanosheet reinforced nanostructures that may potentially be applied in the design and development of several nanoelectromechanical systems such as force and pressure-based nanosensors and actuators.