Abstract
This paper presents an electromagnetic wave absorbing technique to reduce a radar cross-section (RCS) of a patch array antenna without compromising their antenna performance. The technique is based on periodic patterns, which is made of resistive materials. The 2×2 patch array antenna with a resonance frequency of 3.0 GHz was designed and fabricated. To reduce the RCS of the patch array antenna, the periodic patterns using a square patch element were proposed and applied to the surface between the four antenna patches. The printed lossy periodic patterns have radar absorbing performance at 12.0 GHz frequency. The measured results show that the lossy periodic patterns have no significant effect on the antenna radiation performance. On the other hand, the RCS is reduced by more than 98% compared to the conventional antenna at the target frequency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.