Abstract
Graphene nanoplatelets (xGnP), expanded graphite (EG), multiwall carbon nanotubes (MWCNTs), and carbon black (CB) were dispersed in various amounts in a thermosetting polyurethane (PU) matrix derived from castor oil and composite plaques were obtained by compression molding. The electrical percolation threshold was found to be 0.1 vol% for MWCNT, 0.5 vol% for xGnP, 2.8 vol% for CB, and 2.7 vol% for EG‐filled systems. The relation between electrical conductivity, morphology, and electromagnetic interference shielding effectiveness (EMI SE) of the resulting composites was studied to understand how the EMI SE is influenced by morphology and electrical conductivity of each filler. The composites display significantly distinct EMI SE values, depending on the type of carbon filler and its volume fraction. Composite based in PU/EG and PU/xGnP exhibited the highest EMI SE values (70 and 47 −dB, respectively); however, PU/MWCNT composites showed higher EMI SE (24 −dB) value at the same filler content (3 vol%) than the other composite system. POLYM. COMPOS., 40:E78–E87, 2019. © 2017 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.