Abstract
AbstractThis paper presents a study of radar absorbing materials (RAM), based on conducting polymer polypyrrole (PPy) and organic–inorganic nanocomposite of PPy filled with lamellar structure kaolinite clay (PPy/Kao) for X‐band frequency range application. PPy was obtained via a chemical synthesis using doping agent chloride acid, lauric acid, and sodium dodecyl sulfate. The nanocomposites were produced via in situ polymerization, where the same experimental conditions were applied for PPy synthesis. The radar absorbing composite was obtained by mechanically mixing an epoxy resin matrix with the synthesized materials. The characterization was done using infrared spectroscopy, scanning electron microscopy (SEM), thermogravimetric analyses, and differential scanning calorimetry thermal analysis, and electromagnetic measurements. Kao in the nanocomposite was used to promote polymer anchoring, behaving as a host agent. SEM demonstrated that the synthesized nanocomposites produced growth morphology of interconnected nanoparticles in an almost spherical shape and mostly globular in a cauliflower shape, with homogeneous sizes and packaged structure. Results showed that the RAM obtained presented a good performance as an electromagnetic wave absorber, with thermal stability above 120°C and incident wave attenuation ranging from −10 to −33 dB (90%–99.9%) in the X‐band.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
