Abstract

The carbon supercapacitance strongly relies upon the electrolyte’s nature, but the clear-cut structure–performance nexus remains elusive. Herein, a series of bio-carbons with gradually varied pore structure and surface chemistry are derived using a new salt template protocol (with eco-benign KNO3 as the template, activator, and porogen, and cheap gelatin as the carbon precursor), and are used as model systems to probe the dependence of the electrochemical mechanism of such nanocarbons on two typical electrolytes (KOH and EMIBF4). By only adjusting the KNO3 dosage, two pivotal figures of merit of biochar—multiscale porosity and surface functionalization—were finely modulated to construct electric double layers. Electrochemical data clarify that the combined porosity and doping effects all contribute to enhanced supercapacitance, but with only one of the two factors playing the leading role in different electrolytes. Kinetic analysis corroborates the fact that ample heteroatom doping can effectively compensate capacitance by intensive surface redox insertion in KOH, while a suitable pore size dispersion plays a preponderant part in self-amplifying the ion partitioning, and thus dictating a good charge separation in EMIBF4. A quasi-quantitative model of performance–structure relevance in EMIBF4 is judiciously conjectured to hint at a superb ion–pore-size compatibility, in which the bi- and mono-layer ion confinement coupling in integrated single and double ion-sized pores is found to be more useful for curbing notorious over-screening effects and for changing the coordination number, Coulombic ordering, and phase conformation of EMIBF4 in several nm-sized nanopores. This unique energy storage fashion in ion-matching pores promotes the energy density of optimal samples to a novel level of 88.3 Wh kg−1 at 1 kW kg−1, which rivals the overwhelming majority of the reported carbon materials. In short, the comparison case study here reveals a valuable correlation of carbon’s figure of merit and electrolyte type, which may act as a vital rudder to design electrolyte-contingent state-of-the-art supercapacitor materials.

Highlights

  • Owing to the rapid charging–discharging rate, large power density, as well as excellent longevity, supercapacitors have been widely seen as some of the most prospective energy storage devices [1,2,3,4]

  • Eco-friendly KNO3 salts can intercalate in situ into a biopolymer framework to serve as a template, porogen, or activator, and in doing so tune gelatin’s allosteric process during pyrolysis

  • The pore size and doping level of such biocarbons are adjusted elaborately by tailoring salt/gelatin ratios to scrutinize the effects of such factors on both ionic diffusion kinetics and charge storage modes in two electrolytes

Read more

Summary

Introduction

Owing to the rapid charging–discharging rate, large power density, as well as excellent longevity, supercapacitors have been widely seen as some of the most prospective energy storage devices [1,2,3,4]. Carbon materials are regarded as the best potential candidates for SCs, given their overarching merits of large specific surface area (SSA), rich porosity, readily modified properties (such as nanostructuring and functionalization), favorable chemical and thermal stability, environmental friendliness, low cost, precursor availability, and excellent conductivity. Since such closely concerned carbon-based SCs can conserve electricity by fast adsorption and desorption of oppositely charged electrolyte ions through electrical double layers formed around electrolyte–electrode interface regions, their electrochemical properties heavily rely on free electroactive centers facilely accessed by electrolyte ions. It is far-reaching to study the structure–performance relation depending on electrolyte and carbon electrode materials

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call