Abstract
Electrokinetics (EK) was applied to enhance biodegradation of toluene in the low hydraulic conductivity ( K ) zone of a physically heterogeneous water-saturated granular porous media. The hypothesis tested was that EK transport processes, which operate independently of advection, can deliver a limiting amendment, nitrate, across a high- K –low- K boundary to stimulate bioremediation. Two types of experiment were evaluated: (1) bench-scale tests that represented the active EK system and physically heterogeneous sediment configuration; (2) microcosms that represented biodegradation in the bench-scale tests under ideal conditions. The bench-scale experiment results showed a rapid decrease in toluene concentration during the application of EK that was attributed to electroosmotic removal from low- K zones. Comparison of toluene removal rates by electroosmosis and biodegradation (microcosm) confirmed that electroosmosis was the most effective mechanism under the conditions evaluated. Overall, this work challenges the original hypothesis and indicates that, at the field scale, the most favourable conditions for biodegradation are likely to be achieved by applying EK to increase contaminant flux across the low- K –high- K boundary (out of the low- K zone) and allowing biodegradation to occur in the high- K zone either by natural attenuation or enhanced by amendment addition. Supplementary material: Supplementary material is available at https://doi.org/10.6084/m9.figshare.c.5174554
Highlights
Toluene transport and mass removal from the low-K zone in the bench-scale experiments can occur by several mechanisms; namely, electroosmosis, diffusion, sorption and biodegradation
The retardation factor accounts for sorption of the toluene to the sediment, which influences the contaminant transport velocity by electroosmosis (Bruell et al 1992)
These findings indicate that in situations where the contaminant removal rate from a low-K zone by electroosmosis is high there will be an increased flux of contaminants into a host high-K material
Summary
All bench-scale experiments comprised a physically heterogeneous sediment configuration, with a high-K material arranged adjacent to a low-K material, a dissolved toluene source and pH control. Toluene transport and mass removal from the low-K zone in the bench-scale experiments can occur by several mechanisms; namely, electroosmosis, diffusion, sorption and biodegradation.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Quarterly Journal of Engineering Geology and Hydrogeology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
